CLONING GARAGE DOOR & GATE REMOTE CONTROL TRANSMITTER

The CTX is a cloning remote control transmitter that can duplicate your existing automated gate or garage door remote control transmitter.

The CTX has a learning function that copies the code of your original transmitter and stores it in its memory, when the CTX’s button is pressed it transmits that code allowing you to use it to open your automatic gates, roller shutter, garage door, barrier etc

The CTX will copy (clone) any remote control transmitter operating on the 433.92 MHz radio frequency with a fixed code, this means that each time the remote control button is pressed the same code is transmitted. It is not possible to copy any remote that uses code hopping or rolling code technology because these types of remote control send a different code each time the button is pressed.

The CTX has 2 buttons and each button can copy a transmitter code, so if your existing remote control has 2 buttons the CTX can duplicate both of them, you can also copy multiple remotes to the CTX so if you have a remote control for your automatic gate and another for your garage door providing they are both fixed code and operate on the 433.92 MHz radio frequency you can copy both to the CTX, this then allows you to control your gate and garage door using one remote control.

To check compatibility, on the home page we have listed all of the remote control transmitters that we know the CTX will work with, if your transmitter is not shown please do not order.

Please note the CTX requires a working remote control to copy
The colour of the transmitter supplied may vary from that shown

Features

Small size, 50 x 25 x 10mm
Supplied with car dashboard holder / wall mounted holder
Operating range up to 100 metres
2 Channels, can clone 2 transmitters
High quality, made in the EU
Cheaper than original remote controls

CTX cloning remote control including battery
Delivery within the UK - £25
Delivery to the European Union - £30

INSTRUCTION VIDEO

PROGRAMMING INSTRUCTIONS

cloning remote control transmitter

STEP	ACTION	RESULT
1.	Press button A	LED lights
2.	Whilst pressing button A also press button B	LED flashes slowly
3.	Release the button NOT to be learned, whilst keeping pressed the button the you do want to learn	LED stops flashing and remains on
4.	Place your original remote control transmitter next to the CTX and press the button on the original transmitter that you want to duplicate, keep the button pressed	LED flashes to confirm it has copied the code successfully (Flashes quickly first then slowly)
5.	Release the button on your original transmitter	LED remains flashing

Terms & Conditions