COMPATIBLE ALLMATIC REMOTE CONTROL TRANSMITTER

The CTX is a cloning (copying) remote control transmitter that can duplicate your existing Allmatic gate or garage door remote control.

The CTX has a learning function that copies the code of your original remote control and stores it in its memory, when the CTX’s button is pressed it transmits that code allowing you to use it to open your automatic gates, roller shutter or garage door.

The CTX cloning remote control is able to duplicate the following Allmatic remote controls.

ALLMATIC ARMY 1 - 433 and ARMY 2 - 433

Please note the CTX requires a working remote control to copy

CTX CLONING (COPYING) TRANSMITTER
The colour of the cloning transmitter supplied may vary from that shown

Features

Small size, 50 x 25 x 10mm
Supplied with car dashboard holder / wall mounted holder
Operating range up to 100 metres
2 Channels, can clone 2 transmitters
High quality, made in the EU
Cheaper than original remote controls

COMPATIBLE ALLMATIC REMOTE CONTROL TRANSMITTER - £25 including delivery

IF YOUR EXISTING REMOTE CONTROL DOES NOT LOOK EXACTLY THE SAME AS THE ALLMATIC REMOTES SHOWN PLEASE DO NOT ORDER AS THE CTX WILL NOT WORK

ALLMATIC ARMY 1 & ARMY 2 REMOTE CONTROLS

COMPATIBILITY CHECK

To avoid any compatibility issues before ordering please remove the cover from your transmitter and check that it has a row of DIP switches similar to those shown on the right, if you cannot see any DIP switches then this cloning transmitter is not compatible

INSTRUCTION VIDEO

PROGRAMMING INSTRUCTIONS

cloning remote control transmitter

STEP	ACTION	RESULT
1.	Press button A	LED lights
2.	Whilst pressing button A also press button B	LED flashes slowly
3.	Release the button NOT to be learned, whilst keeping pressed the button the you do want to learn	LED stops flashing and remains on
4.	Place your original remote control transmitter next to the CTX and press the button on the original transmitter that you want to duplicate, keep the button pressed	LED flashes to confirm it has copied the code successfully (Flashes quickly first then slowly)
5.	Release the button on your original transmitter	LED remains flashing

Terms & Conditions | Privacy Policy