Cookies in Use
quantek shop
  ALL PRICES ARE INCLUSIVE OF VAT & DELIVERY WITHIN THE UK
HomeLED EMERGENCY & NIGHT LIGHTS Automatic rechargeable power failure torch and night light 8 LED ceiling mounted automatic motion sensing light 10 LED Super Bright Automatic Wireless Motion Activated Battery Powered Night Light Universal Garage Door Replacement Remote Control Kit AllmaticAprimaticBenincaBFTCameCardaleCardinCasalDEAFAACGeniusGibidiHormanMarantecNicePrastelQuantekRIBSEASEAVSommerSteelineTelcom Ordering Contact

USEFUL LINKS
Links
   

Allmatic Broover 3 button remote control keyfob transmitter - Part number B.RO OVER

Allmatic Broover 433 MHz three button rolling code remote control keyfob transmitter for use with Allmatic automatic gates, barriers and garage doors.

Allmatic part number B.RO OVER.

This remote control replaces the following models:

ALLMATIC BROSTAR, ALLMATIC MINI PASS, BENINCA ROLLKEY, EUROPE-AUTO BROSTAR, EUROPE-AUTO MINI-PASS, ALLMATIC TECH 3

Supplied with CR2032 battery and programming instructions.

Dimensions 65 x 32 x 9 mm.


allmatic broover remote control
allmatic logo

ALLMATIC BROOVER - £25
Including VAT & UK postage

add to cart

Programming Instructions

There are two methods for programming your new remote control.

From a WORKING remote control that has already been programmed:

1. With a sharply pointed object, press the hidden button on the back of your already-
programmed and working remote control or press the hidden button found next to the
battery in the inside of your remote control (fig 1). Let it go.
2. The LED light of your already-programmed remote control illuminates. Wait 5 seconds. The
LED light of your already-programmed remote control turns off.
3. During the next 10 seconds, press the button you want to use on your new remote con-
trol, stop pressing the button.
4. Wait 10 seconds.
5. Your new remote control is programmed.

From the receiver:

Please note: if you keep the programming button of your receiver pressed down too long, you will
erase the programming code of all of your remote controls that have already been programmed and they will need to be re-programmed..

1. Open the case of your receiver. It is located next to your motor.
2. On the receiver circuit board, press the programming button marked PGM. The LED light of the
receiver illuminates, immediately Release the button.
3. Within 10 seconds, press a button on your new remote control and release.
4. Wait 10 seconds.
5. Your new remote control is now programmed.

 


nochex paypal

 

 free uk delivery

ALL PRICES ARE INCLUSIVE OF VAT


FEATURED PRODUCTS

motion sensing LED light

Motion Sensing Swivel Light


emergency power cut torch

Automatic Power Cut Emergency Torch


motion sensing ceiling hall light

Motion Sensing LED Hallway Ceiling Light

 

Terms & Conditions | Privacy Policy | Cookies
Copyright © 2016 QUANTEK TRADING LTD All Rights Reserved