GARAGE DOOR REMOTE CONTROL KIT
Universal Garage Door Replacement Remote Control Kit
RADIO REMOTE CONTROL
Radio Remote Control Kit
GSM REMOTE CONTROLS
TELCON 500 GSM Gate ControllerTELCON-IT GSM Power SwitchGSM-AUTO GSM Remote Control Switch
GATE & GARAGE DOOR REMOTE CONTROL TRANSMITTERS
AllmaticBenincaBftCameCardaleCasaliDeaDucatiElcaFadiniGibidiNiceQuantekRibSeavSteelineTauUKTX003Zullan
CLONING REMOTE CONTROL
Cloning Transmitter
USEFUL LINKS Links |
COMPATIBLE BENINCA REMOTE CONTROL TRANSMITTER
|
The CTX is a cloning (copying) remote control transmitter that can duplicate your existing Beninca garage door or gate remote control.
The CTX has a learning function that copies the code of your original remote control and stores it in its memory, when the CTX’s button is pressed it transmits that code allowing you to use it to open your automatic gates, roller shutter, garage door etc
The CTX cloning remote control is able to copy the following Beninca remote controls
BENINCA LOT1W, LOT2W, LOTTX2W, LOTX2WMS
Please note the CTX requires a working remote control to copy
|
CTX CLONING TRANSMITTER
The colour of the cloning transmitter supplied may vary from that shown
|
Features
- Small size, 50 x 25 x 10mm
- Supplied with car dashboard holder / wall mounted holder
- Operating range up to 100 metres
- 2 Channels, can clone 2 transmitters
- High quality, made in the EU
- Cheaper than original remote controls
COMPATIBLE BENINCA REMOTE CONTROL TRANSMITTER - £25 including delivery
|
IF YOUR EXISTING REMOTE CONTROL DOES NOT LOOK EXACTLY THE SAME AS THE BENINCA REMOTES SHOWN PLEASE DO NOT ORDER AS THE CTX WILL NOT WORK
BENINCA LOT1W, LOT2W, LOTTX2W, LOTX2WMS
|
COMPATIBILITY CHECK |
| To avoid any compatibility issues before ordering please remove the cover from your transmitter and check that it has a row of DIP switches similar to those shown on the right, if you cannot see any DIP switches then this cloning transmitter is not compatible |
|
INSTRUCTION VIDEO |
|
STEP |
ACTION |
RESULT |
1. |
Press button A |
LED lights |
2. |
Whilst pressing button A also press button B |
LED flashes slowly |
3. |
Release the button NOT to be learned, whilst keeping pressed the button the you do want to learn |
LED stops flashing and remains on |
4. |
Place your original remote control transmitter next to the CTX and press the button on the original transmitter that you want to duplicate, keep the button pressed |
LED flashes to confirm it has copied the code successfully
(Flashes quickly first then slowly) |
5. |
Release the button on your original transmitter |
LED remains flashing |
|
|
|
|
