COMPATIBLE DUCATI REMOTE CONTROL TRANSMITTER

The CTX is a cloning (copying) remote control transmitter that can duplicate your existing Ducati remote control.

The CTX has a learning function that copies the code of your original Ducati remote and stores it in its memory, when the CTX’s button is pressed it transmits that code allowing you to use it to open your automatic gates, roller shutter, garage door etc

The CTX cloning remote control is able to duplicate the following Ducati remote controls

DUCATI TSAW1, DUCATI TSAW2, DUCATI TPR10, DUCATI TPR20, DUCATI TE1 & DUCATI TE2

Please note the CTX requires a working remote control to copy

CTX CLONING TRANSMITTER

The colour of the transmitter supplied may vary from that shown

Features

Small size, 50 x 25 x 10mm
Supplied with car dashboard holder / wall mounted holder
Operating range up to 100 metres
2 Channels, can clone 2 transmitters
High quality, made in the EU
Cheaper than original remote controls

COMPATIBLE DUCATI REMOTE CONTROL TRANSMITTER - £25 including delivery

IF YOUR EXISTING REMOTE CONTROL DOES NOT LOOK EXACTLY THE SAME AS THE DUCATI REMOTES SHOWN PLEASE DO NOT ORDER AS THE CTX WILL NOT WORK

ducati remote control
DUCATI TSAW1 & TSAW2, TPR10 & TPR20, TE1 & TE2

COMPATIBILITY CHECK

To avoid any compatibility issues before ordering please remove the cover from your transmitter and check that it has a row of DIP switches similar to those shown on the right, if you cannot see any DIP switches then this cloning transmitter is not compatible

INSTRUCTION VIDEO

PROGRAMMING INSTRUCTIONS

cloning remote control transmitter

STEP	ACTION	RESULT
1.	Press button A	LED lights
2.	Whilst pressing button A also press button B	LED flashes slowly
3.	Release the button NOT to be learned, whilst keeping pressed the button the you do want to learn	LED stops flashing and remains on
4.	Place your original remote control transmitter next to the CTX and press the button on the original transmitter that you want to duplicate, keep the button pressed	LED flashes to confirm it has copied the code successfully (Flashes quickly first then slowly)
5.	Release the button on your original transmitter	LED remains flashing

Terms & Conditions | Privacy Policy