Cookies in Use
quantek shop
HomeLED EMERGENCY & NIGHT LIGHTS Automatic rechargeable power failure torch and night light 8 LED ceiling mounted automatic motion sensing light 10 LED Super Bright Automatic Wireless Motion Activated Battery Powered Night Light Universal Garage Door Replacement Remote Control Kit AllmaticAprimaticBenincaBFTCameCardaleCardinCasalDEAFAACGeniusGibidiHormanMarantecNicePrastelQuantekRIBSEASEAVSommerSteelineTelcom Ordering Contact


BFT MITTO Two Button Gate and Garage Door Remote Control Keyfob Transmitter

BFT MITTO 2, 433 MHz rolling code two button remote control transmitter for use with BFT automatic gates and garage doors.

Some early models had a blue case with yellow buttons, this model is fully compatible with the earlier type.

Supplied with 12 Volt LR23A battery and instructions.

Only compatible with the BFT Automation range.

Download the BFT MITTO instructions

Please note: if you use your remote control to open communal gates, barriers or an automated garage door you may not be able to program this remote control yourself. Contact the building or site management company to verify that the system is not code locked.

bft mitto 2 remote control
bft logo

BFT MITTO 2 - £29
Including VAT & UK postage

add to cart

 Programming Instructions

The following process will only work if your control panel has been enabled for
remote programming by the installer. If the following process does not work
you will need the assistance of a BFT recommended installer.

You must be at the control panel. (It does not need to be open)
You will need one existing, functional, transmitter already coded on the system
and any new/replacement transmitters readily to hand.
The following sequence must be followed sequentially in rapid succession; any
pause in the process will cause the system to time out.
Read and familiarise yourself with the process before commencing
1. Press the *hidden button on the back of the transmitter already coded on the
system for 2 seconds
*Newer products do not have a hidden button - this function is now

achieved by pressing the top 2 buttons together
2. Press the functioning button on the front of the transmitter already coded on
the system for 2 seconds

3. Press the *hidden button on the new transmitter for 2 seconds
*On newer products use the top two front buttons together instead

4. Press the desired button on the front of the new transmitter for 2 seconds
Repeat 3 & 4 for as many transmitters as are to be added to the system, but
ensure there is no pause between operations to prevent time out

5. Leave 20 Seconds before attempting to use your new transmitter(s) for the
board to reset
Coding is now complete

If this process fails to enable your new transmitter please seek the assistance of
your local BFT recommended installer.


nochex paypal


 free uk delivery



motion sensing LED light

Motion Sensing Swivel Light

emergency power cut torch

Automatic Power Cut Emergency Torch

motion sensing ceiling hall light

Motion Sensing LED Hallway Ceiling Light


Terms & Conditions | Privacy Policy | Cookies
Copyright © 2016 QUANTEK TRADING LTD All Rights Reserved